Repiping Cost in Selma, TX
PEX, copper, and CPVC repipe pricing — process, disruption, polybutylene checks, and licensed local plumbers in Selma.
Sources · TSBPE · Polybutylene class-action history · Updated May 2026
How much does a plumber cost in Selma, TX?
In Selma, whole-house repiping with PEX costs $4,500–$11,000 (adjusted for 0.935x local multiplier), copper $8,000–$18,000, and partial repiping $1,500–$4,500. The job typically takes 3–7 days. Permits from Selma require a TSBPE-licensed Master Plumber.
Repiping cost in Selma
| Job Type | Typical Cost Range in Selma |
|---|---|
| PEX repipe (whole house) | $4,200 – $10,300 |
| Copper repipe (whole house) | $7,500 – $16,800 |
| Partial repipe (one zone) | $1,400 – $4,200 |
| Galvanized removal premium | +$925 – $2,800 |
Material comparison: PEX, copper, or CPVC?
Your choice of piping material directly affects cost, freeze tolerance, installation time, and home resale value. In Selma, where slab-on-grade foundations are common and winter freezes like Uri occur, selecting the right material is critical.
PEX
$4,200–$10,300Pros- 40–60% cheaper than copper
- Flex routing through walls
- Freeze-tolerant
- Easy localized repair
Cons- UV-degrades if exposed
- Some homeowners prefer copper for resale
- Newer material — less long-term track record
Best forWhole-house repipe, value-driven owners, homes in freeze-prone areasCopper
$7,500–$16,800Pros- Century of proven service life
- Premium home-resale value
- No taste / leach concerns
- Naturally antimicrobial
Cons- ~60% more expensive than PEX
- More labor (soldered joints)
- Bursts in hard freezes
- Pinhole leaks in aggressive water
Best forPremium remodels, long-term owners, high-end resale neighborhoodsCPVC
$3,700–$8,400Pros- Cheaper than copper
- Simpler than PEX in some retrofits
- Available where PEX is restricted
Cons- Brittle in cold and over time
- Harder to repair than PEX
- Some newer codes restrict it
Best forTight-budget partial replacements only
PEX is the strongest fit for most Selma homes. It costs 40–60% less than copper, handles freeze expansion better (key after Winter Storm Uri), and installs faster with fewer joints. Copper remains an option for homeowners prioritizing longevity or resale, but PEX's performance in Texas climate makes it the practical choice.
Signs you need repiping in Selma
If two or more of these apply, repiping is usually cheaper than another year of leak repairs in Selma.
- Multiple rooms experiencing leaks simultaneously, indicating widespread pipe failure.
- Low water pressure throughout the house, not just one fixture.
- Rusty or brown water from all taps, signaling internal pipe corrosion.
- Visible corrosion or pitting on exposed pipes in attic or crawlspace.
- Home built before 1975: galvanized steel or original copper may be failing.
- Recurring pinhole leaks in copper pipes, often due to aggressive water chemistry.
- Gray or blue plastic pipes (polybutylene) installed between 1978 and 1995.
- Major renovation exposing old pipes—cost-effective to repipe while walls are open.
Whole-house or partial repipe?
Selma's median home built in 2010 means most homes have modern CPVC or PEX, but older homes (pre-2000) may have copper or polybutylene. Whole-house repiping is recommended if multiple leaks occur or pipes are polybutylene. Partial repiping works for isolated problem areas, but mixing old and new materials can create future issues.
- Multiple slow leaks across different rooms in the past year
- Pipes are 50+ years old throughout the home
- Polybutylene pipes (homes built 1978–1995)
- Major remodel coming up — walls already open
- You plan to stay 5+ years
- Single zone or single fixture line is leaking
- Pipes elsewhere in the home are healthy and under 30 years old
- Isolated pinhole leaks in one section of copper
- Tight budget today, plan to repipe rest later
- Selling within 1–2 years and want minimum disruption
Repiping process & disruption in Selma
A typical repipe in Selma takes 3–7 days. Plumbers cut access holes in drywall, shut off water in zones, and run new lines. Drywall repair is usually done by a separate contractor—ask your plumber for referrals. Water is restored each evening, but full service resumes after final inspection.
- Day 1
Inspection & permits
Plumber maps existing pipes, identifies material (galvanized, copper, polybutylene), pulls a city permit ($200–$800), and plans the water-shutoff schedule.
- Day 2–5
Drywall opening & install
Drywall is opened along pipe routes. New PEX or copper lines installed and pressure-tested. Water cycled in zones — most plumbers stage so you keep service overnight.
- Day 5–7
Inspection & drywall close
City inspector signs off before any drywall is patched. Drywall restoration (often a separate contractor) takes 2–4 days for patch, texture, and paint.
Permits & code in Selma
Selma requires a permit for repiping, issued by the City of Selma Building Department. Only a TSBPE-licensed Master Plumber can pull the permit. Fees range $200–$800 depending on scope. A mandatory inspection must occur before drywall is closed. Unpermitted work can delay home sales and may force you to open walls later for inspection.
Get a repiping quote in Selma
Tap to call a TSBPE-licensed Master Plumber. Free written quote after on-site inspection.
📞 Call (800) 555-0199 — Available 24/7Repiping plumbers in Selma
8 TSBPE-licensed plumbers serving Selma, Texas. Whole-house repipe is a niche skill — confirm PEX or copper experience.
- Maximus PlumbingView on Google Maps →
- Local Plumbing LLCView on Google Maps →
- JDN Plumbing & Drain ProsView on Google Maps →
- A&A Plumbing, Heating, and CoolingView on Google Maps →
- Crown Plumbing & Water Damage RestorationView on Google Maps →
- Beyer Plumbing CompanyView on Google Maps →
- Beyer Boys Air Conditioning & HeatingView on Google Maps →
- Core PlumbingView on Google Maps →
What affects plumber cost in Selma?
Several local factors influence plumbing prices in Selma, Texas:
- House size — Larger square footage means more linear feet of pipe and more labor. In Selma, a 2,000 sq ft home costs about $6,500–$10,000 for PEX whole-house.
- Material chosen — Copper costs 1.5–2x PEX. For a typical 3-bedroom Selma home, copper adds $4,000–$7,000 vs PEX.
- Number of fixtures — Each sink, toilet, shower, and appliance adds a connection. More fixtures increase material and labor costs proportionally.
- Wall accessibility — Slab-on-grade homes (common in Selma) require cutting into slab for under-slab pipes, adding $1,500–$3,000. Attic or crawlspace access is cheaper.
- Drywall restoration — Plumbers do not typically repair drywall. Budget $500–$2,000 for a separate contractor to patch and paint holes.
Check for polybutylene supply pipes in Selma
Polybutylene pipes were used in homes built between 1978 and 1995, including many in Selma. They failed catastrophically due to a chemical reaction with chlorine in municipal water, causing micro-fractures that lead to sudden bursts. The Cox v. Shell class-action settlement (1995, finalized 2008) provided partial reimbursement but has long expired. You can identify polybutylene by its gray or blue color, ½-inch diameter, and copper crimp rings at connections—commonly found near the water heater or under sinks. Selma homeowners with polybutylene should consider replacement even if no leaks have occurred, because insurers and home buyers view it as a known defect that can void coverage or kill a sale. A proactive repipe avoids emergency costs and stress.
- Visual identification: Look at exposed pipes near the water heater or under sinks. Polybutylene is grey or blue plastic tubing about ½ inch in diameter, often joined with copper crimp rings.
- Class action history: Cox v. Shell settlement closed in 2008. Texas homeowners can still pursue replacement through state-specific consumer guidance and home-warranty programs.
- Recommended action: If found, replacement is strongly recommended even before failures. Most insurers and home buyers treat polybutylene as a known defect.
Insurance coverage in Selma
Standard homeowners insurance excludes repiping due to age-related wear and tear. If a pipe bursts suddenly from a covered peril like a freeze (e.g., during Winter Storm Uri), your policy may pay for immediate repair of the burst section and resulting water damage, but not the entire system. Some policies offer service-line riders that cover the pipe from meter to house, but interior pipes remain excluded. Always review your policy and ask your agent about specific coverage for repiping. In Selma, many insurers now require polybutylene replacement before issuing a new policy.
- Sudden, accidental damage — freeze rupture, falling tree crushes the line
- Sewer/water backup damage if a "backup rider" is on the policy
- Damage during a covered peril (storm, vehicle impact)
- Wear and tear — age-related deterioration
- Tree root intrusion (gradual process)
- Lack of maintenance or known existing damage
- Damage discovered during routine inspection (no clear "event")
Always check your policy declarations page and call your agent before paying out of pocket. Your plumber can provide damage documentation that supports a claim if applicable.
Repiping Near Selma, TX
- Universal City, TX — 2.4 mi
- Live Oak, TX — 2.6 mi
- Schertz, TX — 4.2 mi
- Converse, TX — 5.2 mi
- Cibolo, TX — 6 mi
- Timberwood Park, TX — 12.8 mi
- New Braunfels, TX — 14.3 mi
- San Antonio, TX — 15.2 mi
Repiping FAQs – Selma, Texas
- Should I choose PEX or copper for my Selma home?
- PEX is generally recommended for Selma due to lower cost ($4,500–$11,000 whole-house) and better freeze tolerance—important after Winter Storm Uri. Copper lasts longer but costs more and can burst if frozen. For slab homes, PEX is easier to install without major slab work.
- How disruptive is a whole-house repipe in Selma?
- Expect 3–7 days of work with water shut off in sections. Plumbers cut small access holes in drywall, run new lines, then restore water each evening. You can usually stay home, but expect some noise and dust. Drywall repair is separate and adds 1–3 days.
- Can I stay in my home during a repipe in Selma?
- Yes, most homeowners stay. The plumber will keep one bathroom functional at all times. Plan for limited water access during the day. Discuss a schedule with your plumber to minimize disruption.
- What's the cost-per-square-foot rule for repiping in Selma?
- A rough estimate is $3–$6 per square foot for PEX and $5–$10 for copper. For a 2,000 sq ft Selma home, that's $6,000–$12,000 for PEX or $10,000–$20,000 for copper. This varies by fixture count and accessibility.
- Do I need to repipe drains too?
- No, repiping typically covers only supply lines (hot and cold water). Drain lines are separate and usually made of PVC or cast iron. If drains are old or failing, that's a separate project.
- How long does PEX last in Selma?
- PEX is rated for 50+ years. In Selma's water conditions, it resists corrosion and scale better than copper. Proper installation and UV protection (PEX should not be exposed to sunlight) ensure longevity.
- Is the polybutylene class action still active?
- No, the Cox v. Shell class action settled in 1995 and the claim period ended in 2008. No further compensation is available. Selma homeowners with polybutylene must pay for replacement out of pocket, but many plumbers offer financing.
- Will my insurance cover repiping in Selma?
- Typically no, because repiping is considered maintenance. If a pipe bursts from a covered peril like freeze, your policy may cover the immediate repair and water damage, but not the whole system. Check with your agent for specifics.
Ready to repipe your Selma home?
Get a free written quote from a TSBPE-licensed Master Plumber after on-site inspection.
📞 Call (800) 555-0199 — Available 24/7Sources & methodologyCost ranges from HomeAdvisor, Angi, Forbes Home, contractor surveys. Permits & licensing: Texas State Board of Plumbing Examiners (TSBPE). Polybutylene history: Cox v. Shell class action settlement. Insurance guidance: Texas Department of Insurance. Demographics: U.S. Census Bureau. Page last updated May 2026.