Water Heater Replacement Cost in Hurst, TX
Tank, tankless, and hybrid heat-pump pricing for Hurst homes — plus permits, rebates, and licensed local installers.
Sources · TSBPE · ENERGY STAR · IRS 25C tax credit · Updated May 2026
How much does a plumber cost in Hurst, TX?
In Hurst, TX, water heater replacement costs $1,122–$2,525 for a tank, $2,618–$5,143 for tankless, and $2,244–$4,488 for hybrid, factoring the 0.935x cost multiplier. Permits ($50–$250) and a TSBPE-licensed plumber are required for gas units. Typical replacement takes 1 day for like-for-like, longer for fuel switches.
Water heater replacement cost in Hurst
| Job Type | Typical Cost Range in Hurst |
|---|---|
| Tank water heater (40-50 gal) | $1,100 – $2,350 |
| Tankless water heater | $2,600 – $5,100 |
| Hybrid heat pump water heater | $2,050 – $3,950 |
| Removal of old unit | $95 – $275 |
| Permit and inspection | $45 – $225 |
Which water heater type for Hurst?
Three real options for Hurst households. Pick by budget, household size, and how long you plan to own the home.
Tank
$1,100–$2,500Pros- Lowest upfront cost
- Simple install / swap
- Wide brand selection
Cons- Higher energy use
- Limited hot water at peak
- Takes up floor space
Best forBudget-driven, 1–4 person households, fast replacementTankless
$2,800–$6,100Pros- Endless hot water
- Wall-mounted, frees floor space
- Lowest energy use long-term
Cons- High upfront cost
- May need gas/electrical upgrades
- Hard water reduces life
Best forHigh-demand homes, space-constrained, long ownership horizonHybrid heat pump
$2,250–$4,500Pros- Eligible for $2,000 IRA tax credit
- Utility rebates ($200–600)
- Lowest operating cost
Cons- Needs ≥1,000 ft³ mechanical room
- Slow recovery vs gas
- Slight cooling/dehumidifying effect
Best forEnergy-conscious, mild climate, garage or large utility room
For Hurst's median 1973 home and $71K income, a standard 40- or 50-gallon tank water heater is the strongest fit. It offers the lowest upfront cost ($1,122–$2,525) and straightforward replacement, ideal for older homes with existing gas or electric hookups. Tankless or hybrid may be considered if energy savings offset higher installation costs, but for most Hurst households, a tank heater provides reliable, affordable hot water.
Signs your water heater needs replacement
If two or more of these apply in Hurst, replacement is usually cheaper than another repair.
- Rust-colored water from taps indicates corrosion inside the tank, common in older units.
- Popping or rumbling sounds suggest sediment buildup, reducing efficiency and risking failure.
- Visible leaks around the base often mean the tank is compromised and needs immediate replacement.
- Water heater age over 10–12 years (Hurst's median home built 1973 likely has had multiple units).
- A sudden spike in energy bills without other changes points to declining heater performance.
- Inconsistent hot water, like running out quickly, signals a failing heating element or tank.
Installation process & timeline in Hurst
Replacing a water heater in Hurst typically takes one day for a like-for-like swap. If you're switching fuel types (gas to electric), relocating the unit, or converting to tankless, expect 1–3 days due to additional venting, gas line, or electrical work. Your TSBPE-licensed plumber will assess the job and provide a timeline.
- Day 1
Assessment & permit
Plumber inspects your existing setup, sizes the new unit, pulls the city permit ($50–$250).
- Day 1–2
Removal & install
Old unit drained and hauled away. New unit installed, connected, leak-tested. 4–8 hours typical.
- Day 2–3
Inspection & first heat
City inspector signs off on the install. First full heat cycle confirmed before final payment.
Permits & code in Hurst
Hurst requires a permit for water heater replacement, with fees ranging from $50 to $250 depending on scope. Work must be performed by a TSBPE-licensed plumber for gas units; electric may be DIY but permits still apply. A mandatory inspection follows installation to ensure code compliance. Unpermitted work can lead to fines, failed home sales, and insurance claim denials.
Get a free water heater replacement quote in Hurst
Tap to call a TSBPE-licensed installer. Free, no obligation.
📞 Call (800) 555-0199 — Available 24/7Water heater installers in Hurst
8 TSBPE-licensed plumbers serving Hurst, Texas.
- Dean’s PlumbingView on Google Maps →
- TopTech Electric & PlumbingView on Google Maps →
- Total Care PlumbingView on Google Maps →
- Berkeys Plumbing, A/C & ElectricalView on Google Maps →
- Tioga Plumbing & ElectricView on Google Maps →
- Logan Simmons Plumbing Service Hurst TXView on Google Maps →
- Matrix PlumbingView on Google Maps →
- Oscar Deaton Plumbing CoView on Google Maps →
Energy rebates & tax credits in Hurst
Texas homeowners can claim a federal IRA tax credit of up to $2,000 for qualifying heat pump water heaters (ENERGY STAR certified). Local utility rebates from CenterPoint Energy, Oncor, TXU, or Reliant may offer $100–$500 for efficient electric models. Hurst residents should check their provider's current programs, as rebates vary and may require professional installation.
- Federal · IRA tax creditHeat-pump water heaters only · 25C tax creditUp to $2,000
- Utility rebateEnergy Star units · CenterPoint / Oncor / TXU / Reliant$200 – $600
- Gas company rebateTankless gas only · varies by utility$100 – $300
What affects plumber cost in Hurst?
Several local factors influence plumbing prices in Hurst, Texas:
- Fuel Type — Gas tank heaters are common in Hurst due to lower operating costs, but electric models may be cheaper to install. Switching fuel types adds $500–$1,500 for new lines or venting.
- Installation Complexity — Like-for-like replacements in the same spot cost less. Relocating, adding a recirculation pump, or upsizing venting for tankless can increase labor and materials.
- Brand & Efficiency — Premium brands like AO Smith, Bradford White, or Rheem cost more upfront but offer longer warranties. High-efficiency units (e.g., ENERGY STAR) qualify for rebates but have higher purchase prices.
- Removal & Disposal — Hauling away your old water heater typically adds $50–$150. Some plumbers include this in the quote; confirm before signing.
DIY vs. professional installation in Hurst
Texas law (TSBPE) requires a licensed plumber for gas water heater installations due to safety risks like gas leaks or improper venting. Electric tank units can be DIY, but doing so often voids the manufacturer's warranty and may not meet local code. Tankless and hybrid heat pump systems involve complex venting, gas lines, or electrical upgrades that demand professional expertise. For Hurst homeowners, hiring a TSBPE-licensed plumber ensures safety, code compliance, and warranty protection—especially in older 1970s homes where existing hookups may need updates.
Water Heater Replacement Near Hurst, TX
- Bedford, TX — 2.7 mi
- North Richland Hills, TX — 2.8 mi
- Colleyville, TX — 4.2 mi
- Watauga, TX — 4.8 mi
- Haltom City, TX — 5.4 mi
- Euless, TX — 6 mi
- Keller, TX — 7.1 mi
- Southlake, TX — 8.3 mi
Water Heater Replacement FAQs – Hurst, Texas
- How long does a water heater replacement take in Hurst?
- A like-for-like replacement typically takes one day. Switching fuel types or installing a tankless system may take 1–3 days due to additional work. Your plumber will provide a timeline after assessing your home.
- Is a tankless water heater worth the extra cost in Hurst?
- Tankless units cost $2,618–$5,143 installed in Hurst, about double a tank. They save energy and last longer, but the payback period may be 10+ years. For most Hurst households with moderate usage, a tank heater offers better ROI.
- Do I need a permit to replace my water heater in Hurst?
- Yes, Hurst requires a permit for water heater replacement. Fees range $50–$250. A TSBPE-licensed plumber typically handles permitting and scheduling the required inspection.
- Can I switch from a gas to an electric water heater in Hurst?
- Yes, but it adds cost and time. You'll need an electrician to run a new circuit (often 30–50 amps) and possibly upgrade your panel. Expect $500–$1,500 extra and 1–2 additional days.
- Which water heater brands do you recommend?
- For Hurst homes, AO Smith, Bradford White, Rheem, and Navien are top choices. AO Smith and Bradford White are widely available and reliable. Rheem offers good efficiency, while Navien leads in tankless technology.
- What size water heater do I need for my household?
- For a 2-person home, a 30–40 gallon tank suffices. 3–4 people need 40–50 gallons. Tankless units are sized by flow rate (GPM); a 3–4 GPM unit covers 2 showers simultaneously. Your plumber can calculate exact needs.
- When is a hybrid heat pump water heater worth it in Hurst?
- Hybrids are best in warm climates like Texas because they pull heat from the air. They cost $2,244–$4,488 installed but qualify for the $2,000 federal tax credit and utility rebates. If your water heater is in an unconditioned space (garage, basement), a hybrid can cut energy bills by 50%.
- What warranty should I expect on a new water heater?
- Standard tank heaters come with 6–12 year warranties. Tankless units often have 10–15 years on heat exchangers. Hybrids typically offer 6–10 years. Registering the product and using professional installation ensures coverage.
Ready to replace your water heater in Hurst?
Get a free quote from a licensed local installer. Free, no obligation.
📞 Call (800) 555-0199 — Available 24/7Sources & methodologyCost ranges from HomeAdvisor, Angi, Forbes Home, manufacturer MSRPs. Permits and licensing: Texas State Board of Plumbing Examiners. Rebates: ENERGY STAR · IRS 25C tax credit · utility programs (CenterPoint, Oncor, TXU, Reliant). Demographics: U.S. Census Bureau. Page last updated May 2026.