Water Heater Replacement Cost in Irving, TX
Tank, tankless, and hybrid heat-pump pricing for Irving homes — plus permits, rebates, and licensed local installers.
Sources · TSBPE · ENERGY STAR · IRS 25C tax credit · Updated May 2026
How much does a plumber cost in Irving, TX?
In Irving, water heater replacement costs 16.5% above Texas median: tank $1,398–$3,146, tankless $3,262–$6,408, hybrid $2,796–$5,592. Permits ($50–$250) and TSBPE-licensed plumber required for gas units. Typical install 1–3 days.
Water heater replacement cost in Irving
| Job Type | Typical Cost Range in Irving |
|---|---|
| Tank water heater (40-50 gal) | $1,400 – $2,900 |
| Tankless water heater | $3,250 – $6,400 |
| Hybrid heat pump water heater | $2,550 – $4,900 |
| Removal of old unit | $115 – $350 |
| Permit and inspection | $60 – $300 |
Which water heater type for Irving?
Three real options for Irving households. Pick by budget, household size, and how long you plan to own the home.
Tank
$1,400–$3,150Pros- Lowest upfront cost
- Simple install / swap
- Wide brand selection
Cons- Higher energy use
- Limited hot water at peak
- Takes up floor space
Best forBudget-driven, 1–4 person households, fast replacementTankless
$3,500–$7,550Pros- Endless hot water
- Wall-mounted, frees floor space
- Lowest energy use long-term
Cons- High upfront cost
- May need gas/electrical upgrades
- Hard water reduces life
Best forHigh-demand homes, space-constrained, long ownership horizonHybrid heat pump
$2,800–$5,600Pros- Eligible for $2,000 IRA tax credit
- Utility rebates ($200–600)
- Lowest operating cost
Cons- Needs ≥1,000 ft³ mechanical room
- Slow recovery vs gas
- Slight cooling/dehumidifying effect
Best forEnergy-conscious, mild climate, garage or large utility room
For Irving's 1985 median home age and $76,686 income, a 50-gallon hybrid heat pump water heater is the strongest fit. It cuts energy use by 60–70% vs standard electric, qualifies for $2,000 federal tax credit, and pairs well with Irving's mild climate. The higher upfront cost is offset by lower utility bills and Texas rebates.
Signs your water heater needs replacement
If two or more of these apply in Irving, replacement is usually cheaper than another repair.
- Rust-colored water from the hot tap indicates inner tank corrosion and imminent failure.
- Loud popping or rumbling sounds from sediment buildup heating unevenly.
- Water pooling around the base of the tank signals a leak from the tank or fittings.
- Unit is over 10–12 years old (tank) or 20+ years (tankless); Irving's median home built 1985 likely on second or third heater.
- Energy bills have spiked 20–30% without other changes, meaning the heater is losing efficiency.
- Pilot light won't stay lit or burner flame is yellow/orange (gas models) indicating venting or gas valve issues.
Installation process & timeline in Irving
Replacing a water heater in Irving typically takes one day for a like-for-like swap. Converting fuel types (gas to electric or vice versa), relocating the unit, or switching to a tankless system adds 1–3 days due to venting, gas line, or electrical upgrades.
- Day 1
Assessment & permit
Plumber inspects your existing setup, sizes the new unit, pulls the city permit ($50–$250).
- Day 1–2
Removal & install
Old unit drained and hauled away. New unit installed, connected, leak-tested. 4–8 hours typical.
- Day 2–3
Inspection & first heat
City inspector signs off on the install. First full heat cycle confirmed before final payment.
Permits & code in Irving
Irving requires a permit for water heater replacement; fees range $50–$250 depending on scope. Work must be done by a TSBPE-licensed plumber (Texas State Board of Plumbing Examiners). After installation, the city inspects the work. Unpermitted work can lead to fines, failed home sales, and insurance claim denials.
Get a free water heater replacement quote in Irving
Tap to call a TSBPE-licensed installer. Free, no obligation.
📞 Call (800) 555-0199 — Available 24/7Water heater installers in Irving
8 TSBPE-licensed plumbers serving Irving, Texas.
- Premier Plumbing SolutionsView on Google Maps →
- RWD Services LLCView on Google Maps →
- AAA AUGER Plumbing ServicesView on Google Maps →
- Roto-Rooter Plumbing & Water CleanupView on Google Maps →
- Home Town PlumbingView on Google Maps →
- ARS / Rescue RooterView on Google Maps →
- Ron's Irving PlumbingView on Google Maps →
- AJ's PlumbingView on Google Maps →
Energy rebates & tax credits in Irving
Irving homeowners can claim the federal Inflation Reduction Act tax credit of up to $2,000 for a heat pump water heater. Local utility rebates vary: CenterPoint Energy offers up to $300 for high-efficiency gas, Oncor has $50–$100 for electric heat pumps, and TXU Energy provides $50–$100. ENERGY STAR models qualify for many rebates; check current offers before buying.
- Federal · IRA tax creditHeat-pump water heaters only · 25C tax creditUp to $2,000
- Utility rebateEnergy Star units · CenterPoint / Oncor / TXU / Reliant$200 – $600
- Gas company rebateTankless gas only · varies by utility$100 – $300
What affects plumber cost in Irving?
Several local factors influence plumbing prices in Irving, Texas:
- Fuel Type — Switching from electric to gas or vice versa adds $500–$1,500 for new gas line, venting, or 240V outlet. Irving has both gas and electric utilities.
- Installation Complexity — Like-for-like replacement is cheapest. Moving the unit or upgrading to tankless increases labor due to venting and electrical work.
- Brand & Efficiency — Premium brands like Rheem, AO Smith, and Navien cost more upfront but offer longer warranties and better efficiency. Higher UEF models qualify for rebates.
- Removal & Disposal — Hauling away the old unit typically adds $50–$150. Some plumbers include it; always confirm.
DIY vs. professional installation in Irving
Texas law (TSBPE) requires a licensed plumber for gas water heater installation. Electric units can be DIY, but this voids the manufacturer warranty and risks electrical code violations. Tankless and hybrid models involve complex venting, gas line sizing, or electrical work that almost always requires a pro. For Irving homeowners, hiring a TSBPE-licensed plumber ensures safety, permits, and warranty protection.
Water Heater Replacement Near Irving, TX
- Euless, TX — 6.3 mi
- Farmers Branch, TX — 7.2 mi
- Coppell, TX — 7.4 mi
- Grapevine, TX — 8.1 mi
- Bedford, TX — 9.6 mi
- Carrollton, TX — 10 mi
- University Park, TX — 10.2 mi
- Colleyville, TX — 10.7 mi
Water Heater Replacement FAQs – Irving, Texas
- How long does it take to replace a water heater in Irving?
- A like-for-like replacement takes about 4–8 hours, typically one day. Fuel conversions or switching to tankless can take 1–3 days due to additional work and city inspections.
- Is tankless worth the extra cost in Irving?
- Tankless is worth it if you have high hot water demand (4+ people) or want endless hot water. Payback period is 5–10 years depending on gas rates. For smaller households, a tank or hybrid may be more cost-effective.
- Do I need a permit for water heater replacement in Irving?
- Yes, Irving requires a permit for all water heater replacements. Fees are $50–$250. The work must be done by a TSBPE-licensed plumber and pass inspection.
- Can I switch from gas to electric water heater in Irving?
- Yes, but it requires running a 240V circuit and possibly upgrading your electrical panel. Costs add $800–$2,000. Permits and licensed electrician/plumber are needed.
- Which water heater brands are best for Irving homes?
- AO Smith, Bradford White, and Rheem are top for tanks. Rheem and Navien lead in tankless. For hybrid heat pumps, Rheem and AO Smith are reliable. Choose ENERGY STAR models for rebates.
- How do I size a water heater for my Irving home?
- For a typical Irving home (3–4 people), a 40–50 gallon tank or 6–8 GPM tankless works. Use the 'first hour rating' (FHR) for tanks: target 60–80 gallons for average use.
- When is a hybrid heat pump water heater worth it in Irving?
- Hybrid is worth it if you have a basement or conditioned space (above 40°F) and want to cut electric bills by 60–70%. Irving's mild climate is ideal. The $2,000 tax credit and utility rebates shorten payback to 3–5 years.
- What warranty should I expect on a new water heater in Irving?
- Standard tank warranties are 6–12 years; tankless 10–15 years; hybrids 10 years. Parts and labor coverage varies. Extended warranties are available from plumbers for $100–$300 extra.
Ready to replace your water heater in Irving?
Get a free quote from a licensed local installer. Free, no obligation.
📞 Call (800) 555-0199 — Available 24/7Sources & methodologyCost ranges from HomeAdvisor, Angi, Forbes Home, manufacturer MSRPs. Permits and licensing: Texas State Board of Plumbing Examiners. Rebates: ENERGY STAR · IRS 25C tax credit · utility programs (CenterPoint, Oncor, TXU, Reliant). Demographics: U.S. Census Bureau. Page last updated May 2026.